Marine Segment
Gate Valve
Size : Up to 600 mm
M. O. C. : Gunmetal/Al. Bronze/NAB
Actuation : Hand / Motor / Pneumatic / Hydraulic
Globe Valve (Straight & Right Angle)
Size : Up to 600 mm
M. O. C. : Gunmetal/Al. Bronze/NAB
Actuation : Hand / Motor / Pneumatic / Hydraulic
Check Valve (Swing/Flap/Vertical Lift)
Size : Up to 600 mm
M. O. C. : Gunmetal/Al. Bronze/NAB
Butterfly Valve
Size : Up to 1000 mm
M. O. C. : Gunmetal/Al. Bronze/NAB
Actuation : Hand / Motor / Pneumatic / Hydraulic
Ball Valve
Size : Up to 150 mm
M. O. C. : Gunmetal/Al. Bronze/NAB
Actuation : Hand / Motor / Pneumatic / Hydraulic
Marine & Industrial Segment
Lateral Channel Self Priming Pump
Capacity : Max. 900 LPM @ 1450 R. P. M.
Head : Max. 150 M @ 1450 R. P. M.
Speed : Max. 1800 R. P. M.
Temp. : Up to 60°C (Normal), Up to 95°C (Hot)
Suction Lift : Max. 8 M
Application : Transfer of Liquid with Air/Gas, Domestic, Boiler,
Feed Water, Marine, Fuel Oil, Refrigeration etc.
M. O. C. : Casing – Cast Iron/Gunmetal/Al. Bronze
Impeller – Gunmetal/Al. Bronze
Shaft – SS 410/304/316
Sealing – Packing/Mechanical Seal
Capacity : Max. 1250 LPM @ 1450 R. P. M.
Head : Max. 65 M @ 1450 R. P. M.
Speed : Max. 1800 R. P. M.
Application : Industrial, Transfer of Liquid with Air/GAS,
Marine, Refrigeration, Fuel Oil etc.
M. O. C. : Casing – Cast Iron/Gunmetal/Al. Bronze
Impeller – Cast Iron/Gunmetal/Al. Bronze
Shaft – SS 410/304/316
Sealing – Packing/Mechanical Sea
Centrifugal Self Priming Pump
Centrifugal Pump
Capacity : Max 1300 LPM @ 1450 R. P. M.
Head : Max. 140 M @ 1450 R. P. M.
Speed : Max. 1800 R. P. M.
Application : Industrial, Pressure Boosting, Mining, Sprinkler
Irrigation, Fire Fighting etc.
M. O. C. : Casing – Cast Iron/Gunmetal/Al. Bronze
Impeller – Cast Iron/Gunmetal/Al. Bronze
Shaft – SS 410/304/316
Sealing – Packing/Mechanical Seal
Industrial Segment
DUST COLLECTOR FILTER BAG, BAG CASES AND VENTURI
Features
Specification
Size:
Up to 165 mm OD
Top Design:
Collar/Snap/Ring Type
Bag Material:
Polyester/Fibreglass/PPS/Aramid & Nomex/P84
Cage Material:
GI/SS/MS with Aluminium Paint
Cage Wire:
DIN, BS, ANSI, IS
Mounting Flange:
3 mm/3.15 mm/3.5 mm/4 mm
Working Temp.:
Up to 260 deg. C
Features
Specification
Size:
100 mm to 1200 mm
Design:
Open & Closed Vein, Direct & Chain
Sprocket Drive, Round/Square Opening depending upon size
Self Operated
End Flange
Construction:
CI/Steel Casting/SS & MS Febricated depending upon size
ROTARY AIRLOCK VALVE
AIR SOLENOID PULSE JET VALVE
Features
Specification
Size:
Nominal Dia. up to 65 mm
Material:
Aluminium Alloy Casting
Working Temp.:
Up to 60 deg. C
Supply:
AC 220V 50 Hz
Protection:
IP 65
Industrial Segment
Furnace Tilting Cylinder
Column Regulation Cylinder
Cement Plant Cylinder
Pullback Cylinder
Butt Press Cylinder
Thimble Press Cylinder
Industrial Segment
Industrial/Petroleum Hoses
Rubber Bellows
Coupling
Dosing / Rotary Gear Pumps
Pneumatic Cylinders
